@angelxwing
Active 10 years, 7 months ago-
gimeniux0598 uploaded a new picture: Koi Fish Diagram June 20, 2017 10:41 am
I decided to make the diagram when jewellia asked me for it, also beacause this would make me easier to make another koi fish cause chinnesse instructions are a headache. Download from: http://i34.photobucket.com/albums/d147/Gimeniux/3D%20Origami/koi-fish-origami-3d-diagram.jpg -
shuiaime uploaded a new picture: DSC05149.JPG June 20, 2017 10:39 am
-
That’s cute. Too bad it isn’t edible. =P
-
LOL,, that’s what my sister thinks too xD
-
-
so did u use different sizes of paper?
-
yup 😀
-
-
My favorite cake in your album. I agree, wish it was edible. Looks yummy and beautiful! How long did it take for your to finish the cake? You sure put a lot of effort into it.
-
I don’t really remember how long I made this one. I think like 2 weeks ’cause i was a bit busy during that time ^^ Thank you, I also added the beads stuff so it’ll be more colorful 😀
-
-
very wow cake
-
-
jaxster wrote a new post, Horse and Buggy by tatyana3513 June 20, 2017 10:10 am
-
gimeniux0598 uploaded a new picture: Cinammoroll June 20, 2017 9:35 am
Another from the jewellia’s diagram on flickr. I still have this one, not sure if sell it, give it away or just keep it. -
Adorable!!!
-
wonderful … happy folding
-
I love it!!!!!!!
-
-
dfoosdc uploaded a new picture: 140111195207.jpg June 19, 2017 6:49 pm
Made over 1000 of these (3cm x .75cm). These are the half thickness pieces Danniele told me about.-
That’s amazing trick to use a thick paper, thanks Danniele and thanks David.
-
it doesn’t take a lot of physical strength to make them that small, just very steady hands and a lot of patience.
-
Wow… what are you going to make??
-
I went back to my favorite subject. Dinosaurs. This is a different type. I hope to be finished in a week or so.
-
-
-
-
very cool
-
hi ! really impressive, does the struture is solid at the end with so little pieces ?
-
absolutely. By the time they’re connected they become like a light weight piece of wood.
-
-
Is there a trick to cut them and fold them because when I do it it takes forever
-
i use a rotary paper cutter. it’s quick and easy. it only cost me $20.00
-
-
Useing half thickness pieces you get the same size triangles only thicker?
-
only less thicker
-
much thinner. half the thickness of the regular units
-
-
-
-
mohammadnofal uploaded a new picture: Fuchsia Parrot &… June 19, 2017 6:12 pm
-
Another beautiful and elegant work Mohammad!
-
ThanQ a lot Esmeralda 🙂
-
-
Look them so sweet 🙂 make a 3do tree for them please! Just think 😀
-
Good idea, thanks for hint Nga.
-
-
ThanQ 🙂
-
-
mohammadnofal uploaded a new picture: Pegasus June 19, 2017 4:13 pm
Remake the Pegasus from Russian site! i like it 🙂-
It looks great! Do you mind me copying your wings for one of my projects?
-
ThanQ Kinoko 🙂 i remade it from the Russian site, sure you can copy them 🙂
-
-
Its awsome it motivated me to try my new own project unicorn + pegasus 🙂 it will take a while but ill try make it.
Awsome work !!!-
Thanks Marcin 🙂 I take the instructions from the Russian site 😉 i would love to see your Unicorn soon 🙂
-
Bad news i changed my unicorn + pegasus for new dragon project on my profile you can see my first not completed head prototype its head only for now becouse i need to get same blue colour for rest of whole dragon and most ofthe paper shops doesnt have that same colour so i need to get it from net or search in next monday on shops again.
-
-
-
Someone asked me where did i found this but i really don’t remember who!! i’m sorry!! but here is the link as i promised.
http://stranamasterov.ru/node/283461?tid=328
-
-
jaxster wrote a new post, Diagram My Melody June 19, 2017 2:38 pm
-
jaxster wrote a new post, Welcome to 3dOrigamiArt.com June 19, 2017 2:02 pm
-
isabellesss uploaded a new picture: piplup 3d origami … June 19, 2017 1:57 pm
here is my little video of pipluphttp://www.youtube.com/watch?v=n_VtMVkDIjw -
jaxster wrote a new post, 3D Origami Piglet by Jaxster June 19, 2017 8:59 am
I saw some really cool 3D Origami Piglets online and thought to myself that I really want to make one. I looked and studied Piglet pics online to see what type I wanted to make and I saw one really cute baby Piglet. So I model my design after that picture. I wanted my Piglet […]
-
gimeniux0598 uploaded a new picture: Batzumaru N°2 June 19, 2017 8:14 am
This is not only the second and a better looking Batzumaru. But the point in time when i replaced 4×6 cm for 4x8cm paper. I like much more the finished look it gives. -
i love your batzumaru.
can you make a stopmotion of it?
-
-
mohammadnofal uploaded a new picture: Swan June 19, 2017 7:37 am
-
great 🙂
-
ThanQ Nea 🙂 i just try to do my best 🙂
-
-
so nice! i like your way to make your art dear!
-
Thanks alot Fausta 🙂
-
-
Nice Mohammad 🙂
-
Thanks Lisa 🙂
-
-
It’s amazing!
-
ThanQ Danielle!
-
-
-
jaxster wrote a new post, Here's a beautiful boat by Mr … June 19, 2017 12:57 am
-
That is fantastic!! I’ve been so busy I did have time to look around. I’m sorry I didn’t see it sooner. Wow! Great Job
-
-
jaxster wrote a new post, 3D Origami Boat by Mr Park – Jaxster June 18, 2017 4:15 am
I was in Korea on Sept 5th and stopped by Mr. Park’s house and got some pics and video of a beautiful 3D Origami boat that took him months to make. This is one of the most intricate and gorgeous 3D Origami Boats I’ve ever seen. Please enjoy the short video and pics.
httpv://www.youtube.com/watch?v=2XhBLBl4MHE -
skong125 uploaded a new picture: 3D Origami Elf June 18, 2017 3:56 am
The last of my festive models… maybe next year I'll make more 😀-
This is really cute 🙂
-
so cute skong!
-
Awesome.
-
Thanks, for this mini piece, I used a normal A4 cut them into 64 pieces. Normally I would cut them into 32 pieces for my normal projects 🙂
-
-
dfoosdc uploaded a new picture: Scarlet Macaw June 18, 2017 12:17 am
I'm in the process of upgrading my work in higher resolution.-
OMG! Cant wait! Your artwork looks even more amazing in HD 🙂
-
thanks, i may have to back down on the resolution a bit. it took forever just to upload the two pics i did
-
wow, this is awesome, now we can see the details also 😀
-
WOW ,amazing , superior !
-
HD 😀 good job 🙂
-
-
jaxster wrote a new post, 3D Origami by ~Jo-En Joseph June 17, 2017 11:00 pm
Hi first saw Josephs work while browsing Deviant Art. I saw this 3D Origami piece made of all white and looked like manga. I thought… wow this is really creative. You can tell he has a pure passion for manga and he expresses it with 3d origami. Here’s what Josephs interests are: Interests: Anime, Manga, Drawing, […]
-
wow great models
-
i too love anime yay i found a fellow anime lover 😀
-
-
eatmygiraffe wrote a new post, Update from Joshua June 17, 2017 8:46 pm
Hey everyone! If you don’t know who I am, I’m Joshua Naraja. I’m just here to let you guys know that I wont be posting tutorials on my youtube account anymore. I somehow ran out of space on my computer and my Dad needs the space I will post somemore in the future though. Hopefully […]
-
jaxster wrote a new post, Cool 3D Origami Panda by streamkit June 17, 2017 5:56 pm
I really liked this pande 🙂 I found a new 3d Origami Artist on YouTube named streamkit.
httpv://www.youtube.com/watch?v=37Iiex267nk
-
Nice one, i like it too.
-
its cute
-
- Load More
This is a really great horse and buggy by 
I found this cool diagram on the internet of My Melody. Looks like it’s from a Japanese book. Enjoy!
Here’s a beautiful boat by Mr Park. I have one of my pieces standing next to it. 
I used this when I made my koi fish. It was weeks before the tutorial went up on youtube so it was a big help, thank you. =]
I’m glad it helped!