@numberone3dorigamimaster
Active 10 years, 11 months ago-
dfoosdc uploaded a new picture: Raptor-profile January 9, 2016 8:16 pm
-
3demiliocosta uploaded a new picture: QUADRO MOSAICO DI O… February 5, 2013 1:16 am
-
daantjuh3dg uploaded a new picture: Celebi January 10, 2012 8:50 am
-
super nice. I like this one
-
I’ve seen your deviantart page before. You have lots of nice projects and I think you’re very creative. I hope to see more of your works in the future. =]
-
Thank you, yeah I’m also active on deviantart =D saw yours also.. keep up the good work ๐
-
Thanks! =D I’m curious as what you do to make your piece shiny. It’s prolly varnish. I should start doing that to mine as well as evident by the explosion of modules on my desk, heheh.
-
I used varnish. my older models started to fall apart, and I couldn’t put them together again ๐ so now I varnish them so they will stay together ๐
-
-
-
-
wow thats nice good job!
-
Thank you!
-
-
Celebi … I think too that is really hard to make… happy folding
-
yeah He wasn’t easy to build, I remade the head several times, because I wasn’t happy with the shape.
But now I’m totally happy with him ^-^
-
-
i like the way you varnish your works, really amazing!
-
You gived me an idea! i gonna varnish my new project with a Watery Varnish, i think it will looks better
-
haha good luck with the varnishing. It takes some time, but it’s worth it. ๐
-
Yea i’m sure about that ๐
-
-
-
this….this is incredible
-
Thank you!
-
-
i like this… great job… can i do this celebi?
-
thank you! hmm you can try to make it,I found it very hard to get the shape of the head right..
-
-
This is one of my favorites. You are awesome !!!!
-
thank you David, Celebi was always one of the pokemon I really loved. I will make a lot more pokemon, If I can fins some time ๐
-
-
beauuutiffuuulllll
-
thanks!
-
-
you really do have lot of patience. keep up the gr8 job
-
Haha yeah I have, But sometimes I need to have patience, because of my desease ๐
-
-
Wow… amazing!!!
-
Thank you!
-
-
-
dfoosdc uploaded a new picture: serpent.jpg December 5, 2011 9:49 am
-
Looks awesome. It must have taken a few thousand pieces, right?
-
Thanks for the complement!!! You are very talented yourself!!!!!
-
Thank you for thinking so. =D
-
-
-
about 5,000 or so. It took me a few months to complete.
-
wish i had a better camera.
-
you have great talent sir.
that must be your greatest work right?-
I hope not yet. I still have a lot of ideas for other projects
-
-
Amazing…
-
ouffffffffffffffffff wow what a great piece. omg it s amazing congradulation ๐ magic
-
Wauw !!! Really awesome !!!
-
im going to try to make this
-
go for it. I’d love to see someone else try it.
-
-
Really amazing work, i gonna try it too.
-
If you need any advice, just ask. I kept notes when I made mine.
-
I promise to take your advice when i be ready to make it soon IGW ๐
-
good luck
-
ThanQ No1.
-
-
-
-
-
wat size did you use
-
It worked it from the tail to the head. It starts out with 1.5cm x 3. The bulk of the project uses 2.5cm x 5 and 3cm x 6. If I recall correctly the rows (the bulk of the project) use a total of 18 units. half 2.5 x 5 and the other half 3 x 6. you use the smaller unit on the inside curve and the large outside. this has the effect of making it…[Read more]
-
…..? bulk? inside? um i dont get it
-
By bulk I mean most of the project. The whole serpent is nothing more than a tube. it start out narrow and then gradually increases in diameter. If you want the tube to bend (say your using 18 units per row) on the side(direction) you want the tube to bend you use 9 of the smaller unit on that side of the tube and 9 larger unit on the opposite…[Read more]
-
-
-
-
hey are there any inverse pieces? any tips you can give me. averything is appreciated. thanks a lot and its beautiful
-
The yellow on the underside and most of the head is inverted. everything else is normal so as to try to simulate scales.
-
-
thanks a lot. do you know approx how many pieces?
-
252 – 1.5 x 3cn green, 126 2 x 4cm green, 406 2 x 4cm yellow,
126 2 x 4cm purple, 3300 2.5 x 5cm green, 440 2.5 x 5cm yellow,
2794 3 x 6cm green, 837 3 x 6cm yellow-
that does not include gold used for horn or purple along the spine. I’ll have to count those next time I get a chance. I kept a inventory list of all the pieces I folded as I went along.
-
no dont worry about it. you have helped me enough. thanks a lot and i love your work. keep the magic going
-
-
-
-
fantastic David ,like all your work.
-
Thanks lollaa. This is one of my favorite works.
-
-
it just wont curve. im 14 rows in and nothing. any idea why?
-
are you using two sized pieces in each row. the rows us 9 -2.5x5cm and 9 – 3x6cm. as you progress it should curve in the direction of the smaller size. If not, try 9 – 2x4cm and 9- 3x6cm. that should curve it a little sharper. be patient it will curve.
-
i was using 9 by 4.5 and 7.5 by 3.75. same ration as the ones you were using but if size is the thing maybe it will take me longer since my pieces are much larger
-
That’s probably why. stick with it.
-
mr foos i need some advice i think im losing my love at 3d origami wat should i do
-
You need to go with your heart and do what it tells you to do.
-
-
-
-
-
-
wicked! amazing =)
-
Sir looking at this pic, i want to make a serpent like yours , but want to make a lamp shade too, not able to decide. My be i will first go for the lamp shade, i dont dare to make something like this so early. Btw from the comments above what i have understood is when we need a curve we will have to use smaller units for the inside part. Is it…[Read more]
-
that correct. As you add pieces you put the smaller ones on the side you want to curve (direction).
-
-
Nice work!How did you make him to turn,I don’t understand,from comments from above you said that if you want to curve you have to put smaller pieces?
-
each row uses to different sizes. as you put them together they will curve naturally. you put the smaller pieces on the inside of the direction you want it to curve
-
-
-
dfoosdc posted a new activity comment March 29, 2011 1:17 pm
I’m pretty sure everyone would enjoy making if you did. I’m in the middle of a project right now, but after I finish I might give it a shot. I think it look pretty cool. Thanks
-
I can be pretty certain that you aren’t going to follow any diagrams David! LOL. and I”m almost positive you will be the Foos touch on your dragon piece… soooo… can’t wait for you to finish your project! I’m sure you’ll make a kick azz dragon which I’m already dying to see.
-
I’ve actually been meaning to do one. Other ideas just keep getting in the way. I keep a list of the projects I would like to try. Slowly but surely I’m getting them done.
-
-
-
3demiliocosta uploaded a new picture: FARFALLA 1.jpg February 21, 2011 2:52 am
Unbelievable. You truly have a gift for 3D Origami.
Hey David… are you on YouTube? it would be cool if you took some video of your works.
…… …. mr.foos this is way better than imaged wow speechlesss
Thanks for the compliment. Coming from you that’s a real honor. I am on you tube. I’ve been working on a video to upload there. I really need to get some better equipment (Camcorder).
Unbelievable and speechless on seeing your project , u r truly gifted mr.foos. after a long time here, otherwise i would have missed to see your raptor
i agree with you he is a modern day hero
Golden Venture would be so proud you’ve given a new dimension on their craft.. they’d be surely amazed if they would see your work.
Once again, AMAZING work !
Just would know how many pieces you need at all ? ( or just an approximation, ’cause with the little side of pieces, i have no idea )
Also, have you plan to make a tutorial ;D ? I think a LOOOOOT of persons would to ๐
One last time, wanna tell ya, how you work is nicer and awesomier than every ohters creation 3d ( sry…[Read more]
I’m guessing probably around 5000 pieces. As far as doing a tutorial, I wouldn’t even know where to start. Most of my models are designed as I go. I suppose if I were to make several of them I might be able to do it. I kind of like not having a diagram to work with. It gives me more freedom to do what ever I want with it. Thanks for the…[Read more]
Ok ^^, i gonna try to make something with these littles pieces ๐
Continue to make us dream with your news creations !!
I would start with something easy. try to see the basic shapes involved. It will help you understand what you need to do. I also recommend studying a few pictures of the subject and keep them handy for reference.
Hello. It is a wonderful job. My son is fond of dinosaurs and want to have one. What size in inches are the pieces? Have diagram? Thank you very much. I hope you do not mind
Sorry. Me like to know the size of the room in centimeter not inches
This is wonderful, an example of what to achieve.